Slint Printer Demo for the Waveshare ESP32-S3 Touch AMOLED 1.8″
===============================================================

This archive holds the Slint printer demo, built for the Waveshare ESP32-S3 Touch AMOLED 1.8″.

What You Need
=============

- Waveshare ESP32-S3 Touch AMOLED 1.8″
- A USB cable

Flash the Demo
==============

Install espflash with `cargo install espflash`,
or download it from https://github.com/esp-rs/espflash/releases.
Connect the board to your computer over USB and run:

    espflash write-bin 0x0 printerdemo-waveshare-esp32-s3-touch-amoled-1-8.bin

If the demo doesn't start, press the board's reset button.

To use esptool instead:

    esptool.py write_flash 0x0 printerdemo-waveshare-esp32-s3-touch-amoled-1-8.bin

Build It Yourself
=================

The demo's source is at https://github.com/slint-ui/slint/tree/master/demos/printerdemo_mcu
The build steps are at https://github.com/slint-ui/slint/tree/master/examples/mcu-board-support
